1. If your Star label printer is showing a red light on the front of the printer the printer labels are either out or jammed.
2. Open the Star label printer by pressing the release button on the right side of the printer. This will open the top of the printer.
3. Open the Star label printer and remove the old label roll from the role holder by lifting straight up and out of the roll cavity.
4. Insert a new roll into the printer by placing the roll in the cavity and pushing it back until the white roll guides move back, flip down and sit inside the roll.
5. Ensure the paper is feeding over the top of the roll and pull the printer labels through the front of the printer.
6. Ensure the label is pulled through the front of the printer and close the STAR Printer.
7. Press the dispense button in the bottom right corner to dispense the first label. Once the light on the right corner turns BLUE you are ready to print!
Was this article helpful?
That’s Great!
Thank you for your feedback
Sorry! We couldn't be helpful
Thank you for your feedback
Feedback sent
We appreciate your effort and will try to fix the article